Features & Specification
The kit includes three 120 mm RoyaleFlow RF120 ARGB fans, plus an ARGB controller. 
Each fan comes with crystalized ARGB diffusers on both sides of the frame, producing a more uniform, decorative lighting effect. 
The motor is a hydraulic bearing gear motor, which helps with quieter operation and decent lifespan. 
The fans are rated to run up to 1200 RPM (± 10%), giving moderate speed without being too noisy. 
Maximum airflow per fan is about 38 CFM, which is suitable for general case ventilation. 
Noise level at full speed is approximately 20 dB(A), aided by rubber grommets or shims on the fan’s edges for vibration damping. 
Static air pressure (or air pressure rating) is about 1.0 mm H₂O, which means they can push air decently through restricted spaces (filters, grills) though they are not high‑static pressure fans. 
Operating voltage is 12 V DC for the fan motor. Startup voltage is quoted as ≤ 6 V. 
Current draw is about 0.16 A ± 10% per fan. 
Dimensions of each fan are standard 120 × 120 × 25 mm.
Connectors: The fan uses a 3‑pin (fan) + Molex connector, and for the ARGB lighting there are 3‑pin male + female ARGB lines. 
Lighting & controller: The ARGB controller in the kit is powered via SATA. It supports connecting up to 5 RoyaleFlow fans at once. The lighting can be controlled via the provided controller or via motherboard RGB utilities (if compatible). 
Warranty & What’s Covered / Not Covered
Warranty period is 1 year from date of purchase. 
Covered under warranty are manufacturing defects (any issues due to bad components or assembly) that show up within the warranty period. 
Not covered under warranty: damage due to unauthorized tampering, modification, or repair; physical damage; water damage or damage due to excess heat, humidity, moisture; or mishandling.
To claim warranty / service: use the RMA portal of Ant Esports / Antesports. Provide proof of purchase and required contact info.